IB348 - Retractable swivel system with vacuum bench B3 spraying system and tank CO assembled and installed
Manual machine for gluing

Item Card: IB348

The machine is composed by:

- Retractable swivel structure.

- Vacuum bench B3 equipped with a silent and powerful engine to contain even more the nebulized adhesive.

- Spray gun G6 with ergonomic handle which makes it an efficacious and precise alternative to the brush. The spray gun can perform a jet of glue from a minimum of 3 mm up to a maximum of 50 mm.

- Stainless steel tank 10 lt. capacity treated with non-stick Teflon.

Thanks to the retractable swivel structure, it is possible to place the vacuum bench B3 with the spraying system and the tank CO and easily store everything inside the table reducing, in this way, the overall dimensions and optimizing the operator's working spaces.

The operator, after starting the machine, can place the materials on the working plane so to make maximum use of the intake on the working plane for both keeping the materials standing and absorbing the nebulized adhesive.

All the spray gun functions can be adjusted: quantity of adhesive, width of jet and quality of distribution even on different thicknesses.

For a proper functioning of the vacuum bench it is recommended to replace the filter each time is visibly dirty or when the vacuum bench is not intaking properly.

A jet of air immediately before and after the adhesive nebulization keeps the nozzle constantly clean. Our systems are maintenance free.

The tank is conceived in a way that allow the use of the adhesive in bag in box avoiding to make dirty the tank and to filter the glue thus preventing the contact with air which can alter its properties.

Specific: