Item description: A5.3C
Automatic bonding system, equipped with insulated drying tunnel adjustable from 120cm up to 170cm with hot air and temperatures adjustable up to 110 degrees with circulation of internal air to minimize the consumption, spray gun model G9 whose jet can be adjusted from a cone shape of 15mm up to a knife shape of 200mm, conveyor belt 300 cm adjustable, intake and Teflon stainless steel adhesive tank 10 lt. capacity.
On request, it is possible to add a second spray gun on the axle in order to use different kind of adhesives and or one or more manual spray guns.
The operator places the materials on the padded carpet of the conveyor belt which automatically brings the materials under the spray gun where the adhesive is applied in an uniform way.
Afterwards the materials go inside the drying tunnel for a quick drying of adhesive under any climatic condition.
At the tunnel exit the materials are ready to be coupled.
Thanks to this system the materials are not displaced so there are not idle times due to the manual management of these working phases.
The powerful intake prevents even the most light materials from moving due to the air coming out from the spray gun and at the same time it avoids the pulverized particles of adhesive to spread around the machine.
Specific:
| Capacity m3/h: 3050 | Volt: 400 Vac | Prevalence: 53 | Air lt/min: 180-200 | Bar exercise: 7 |
| Decibel (dB): 79 | Watt: 4500 | Hertz: 50 | Ampere: 8,4 | Average consumption: 4500 |
| Gross Weight kg: 470,000 | Tare Kg: | Length mt: 3,15 | Height mt: 1,95 | Volume m3: 8,59 |
| Net Weight kg: 470,000 | Packaging Kg: | Width mt: 1,40 | Useful work plan cm: 100 x 307 | |
